FIDERO RESOURCES (NO LIABILITY)

As any reader who has been following this blog for a while will be aware, I have a certain interest in model railways and underground ‘Hard rock’ gold mining, and that at times these interests have a way of combining. What follows is the latest iteration of this interest; a small 1:43 / 7 mm: 1 ft scale model railway layout which I have christened Fidero Resources (No Liability).

The layout represents a departure from my previous modelling efforts in that it is in a larger scale (‘O’ scale; 1:43 ; 7mm: 1 ft) as opposed to my previous, long-held, enthusiasm for ‘N’ scale (1:148 ; 2 mm: 2 ft), with the latter-scale having reached the limits of its possibilities.

As with the other layouts that have appeared on this blog, it is again set in New Zealand and, once again, located in that  part of that country known as the Coromandel Peninsula, specifically ‘Somewhere North of Karangahake, Somewhere South of Port Charles’, and deep within the remote ranges of that part of New Zealand.

The layout is in the early stages of its development and it is hoped that as it evolves and develops over time,  this particular Blog will be updated.

However, by way of background, what follows is an introduction:

Back Story

It is 2018 and Fidero Resources (N.L.) is a small Auckland-based gold mining company employing 20 men and extracting profitable ore from several small reefs (lodes).

The Mine is located at the upper end of a valley and a small, 18 inch (457 mm) gauge tramway (aka ‘Tram’) is used to convey the extracted ore to the processing plant located some distance away. To do this battery-electic locomotives (Both built by PastaeSpghiti SPA of Bologne,Italy c/n’s 002 and 003) are used, and they perform their humble tasks efficiently.and reliably.

The tram itself has little to distinguish it from others of its ilk, with the only feature of note being a centre-rail brake installed on the line immediately after it leaves the mine. The severity of the gradient necessitated such an installation and it works well and without any problems.

Locomotives

Currently two are owned by the company. Both are battery-electrics.

No.1 (also by PastaeSpghiti SPA of Bologne,Italy c/n 002) has recently returned from a rebuild, and while leaving No.2 to do the majority of the work, is being ‘tweaked’ prior to re-entering service. .

Rolling stock

The tram’s rolling stock is exclusively of the 4-wheeled side-dump type, with the locomotive (aka a ‘Trammer’) taking empty wagons underground to the working faces then, after they are loaded, taking them back outside and along the tramway to the processing plant.

Utilising the wagons in this manner avoids double-handling and enables an increased volume of ore to be worked.It is also quite prototypical.

The Reality

The layout baseboard was constructed to operating stage by Bonjing Valley Group (P. Smith Prop.) on my commission; woodworking and wiring not being part of my skillset. It was received into my care on 27 January 2019 and I have had the pleasure of creating the scenery, locomotive/s etc. which appear in the images.

 

Scenery

This has been the most interesting aspect of this layout; my use (for the first time ever) of pre-formed plastic vegetation specifically intended to replicate local fauna and flora. The ‘plants’ are made by a local organisation and although nominally OO/HO scale (1:87) in scale, seem to be ideally suited for my purposes. Although it is in fact possible to purchase the key items separately, as used on Fidero, the vegetation has come in ‘mat’ form, needing only to be cut to fit. As such it has proven very useful, and as it takes acrylic paint well, has proved suitable for its task.

Vehicles

Because it is set in the Twenty-first Century, motor vehicles form an integral part of the layout. As a result several Landrover 4-wheel drive vehicles have made their appearance as support vehicles for the operation. They can be seen in various places.

Staff 

The Company has ben fortunate in being able to acquire and retain the services of ‘Bill’ a very amiable and competent Large Lizard (aka ‘Dinosaur).  He holds the position of ‘Curator in Residence’ and closely and carefully supervises what is being done by the layout’s  builders. He is not averse to Landrover rides…

Structures

As with all my models, these are mainly constructed from discarded Picture Matte Board (aka Picture Framing Card ) and are layout specific. As the layout is evolving,  at the time of writing they are at best ‘temporary’, and may change as more information comes to hand.

 

Technical Details

Title:  FIDERO RESOURCES (NO. LIABILITY.)

 

Type: Gold-mining tramway (light railway)

Location :Coromandel Peninsula, New Zealand

Scale: On18 (1:148 / 7mm= 1 ft)
Track gauge: 18 inches (457 mm)

Dimensions:

Length: 42 in (1066 mm)
Width: 23.5 in (596 mm)

Track Geometry:

Distorted oval rising at both ends.

AS RECEIVED 27 JANUARY 2019

FIDERO RESOURCES (NO LIABILITY)

Baseboard as received 27 January 2019

H. 24 March 2019

FIDERO RESOURCES (NO LIABILITY)

As at 25 March 2019

 

20190216_120311

FIDERO RESOURCES (NO LIABILITY)

Trammer No.2 descending the Centre-rail section. Locomotive shed on left.

TRAMMER (2)

FIDERO RESOURCES (NO LIABILITY)

Trammer No.2 ascending the embankment to the processing plant

Part of cyanide plant visible in background

(vegetation has since been added to this area; see next image)

TRAMMER 2 ASCENDING GRADE TO MILL 24 MARCH 2019

FIDERO RESOURCES (NO LIABILITY)

General view of Tramway and Processing Plant. Trammer No.2 is on gradient

Note vegetation, including Gorse (‘Furze’) in bloom.

20190307_075510 (2)

FIDERO RESOURCES (NO LIABILITY)

Image showing Company  Landrover (Series I), Managing Director (in front of vehicle) and Curator in Residence (to right of image). 

_________________________________

FIDERO RESOURCES (NO LIABILITY)